VRS FWD 1g Turbo Back Exhaust

[whiteythepimp]

So i'm running an sbr g60 on a hafe manifold w/ a tial 38mm wastegate.. I have a evoIII o2 housing thats ported.. Any input on down pipe and exhaust to use?.. I was looking at the VRS 3" down pipe and the VRS 3" cat back.. Curious as to if anyone has input on how it would sound, mount up (had 3 hondas, dont want the riced out 'hang' look).. Should I get the full turbo back exhaust and just swap the o2 housing from VRS for the EVO III?...

OO by the way I have a 90 gst

 

[cruisintalonawd]

Sounds ricey for an infinity Apexi sounds good

 

[DSMboostin15]

I have the same exhaust you are looking at. The exhaust does not come with a 02 housing, but go with the EVO III anyway as it is the best one you can get for the price. The system bolts up pretty nicely, but the muffler hangers didn't line up, so APEX welded new ones for $10. Nice thing about the exhaust is that the muffler comes straight out the back, not at an angle, and stops flush with the bumper. As for the sound, it doesn't sound ricer at all. At idle, it has a nice low bass tone and at WOT, it has a nice mild tone, and it's not annoying while cruising.

 

[DSMboostin15]

I have the same exhaust you are looking at. The exhaust does not come with a 02 housing, but go with the EVO III anyway as it is the best one you can get for the price. The system bolts up pretty nicely, but the muffler hangers didn't line up, so APEX welded new ones for $10. Nice thing about the exhaust is that the muffler comes straight out the back, not at an angle. As for the sound, it doesn't sound ricer at all. At idle, it has a nice low bass tone and at WOT, it has a nice mild tone, and it's not annoying while cruising.

 

[Jeff_Ciesielski]

Not sure about the install issues, but i'll vouch with dsmboostin15 on the sound, I've heard and driven his car, and it sounds awesome in either case.

 

[whiteythepimp]

Cool... Any pictures by any chance guys?... Thanks for the info btw!

 

[pitbull419]

You will more than likely have to reweld the flange on the exhaust to bolt up to the evo housing.
The evo housing is at a little different angle than a 1g housing.

 

[whiteythepimp]

What if my downpipe has a decent flex to it (vrs)?.. Would I be able to just bend it to fit?