Quick S-AFC Wiring Question

[RJD2]

I just installed some RC 550 injectors and a S-AFC I and I started the car and everthing seems to be fine, cuts off when I cut the car off, but when I cut the car off and the back on all my settings are gone. I'm guessing it's the power wire but where do I wire it to then??

 

[RJD2]

and then** back on. Lol sorry.

 

[98mitsuGSX-SD]

Don't bump your own thread. Specially after just one hour on the forums! The best you can do is verify that you wired the S-AFC correctly using the ecu pin layout here.

 

[15 sec gs]

did you check and see if you there is a constant power you might have just hooked up the switched same concept as a head unit....

 

[99gst_racer]

RJD2 - Do not bump your threads here. It's against the rules, and a furthur repeat could lead to account suspension. Please be patient and wait for others to respond.

 

[123212321]

Are you sure you have everything hooked up tight and secure? I would just go back and make sure everything is right - especially your ground and power wires and match it to the diagrams on the SAFC2 website.

 

[blcknspo0ln]

did you check and see if you there is a constant power you might have just hooked up the switched same concept as a head unit....

I would assume the same thing. Everytime you turn your car off your SAFC is no longer getting a constant power, hence why it would think that the battery is dead and "initialize (reset)" itself. Try wiring the constant to a better power supply like the head unit wire.