Exht Manny Opinions

[talon91tsiawd1]

I have come across this exht manny and I wanted to know what everyone thinks about it. The external gate is set up on runners 1 and 2 and for a 38mm gate. Will it function right?

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[92awddsm]

I am confused as to why the first two pics are normal and the rest are mirrored.

Anyway, if the price is right, welds are solid, and no cracks, I would get it. Then you could get it ported, cleaned, and ceramic coated and use it with your next turbo upgrade. If you want it for your current setup, I would just pass on it. Your current evo manifold probably flows more and your 16g should be no where needing an external wg so for current setup, it would be a waste of $.

 

[talon91tsiawd1]

I am confused as to why the first two pics are normal and the rest are mirrored.

Anyway, if the price is right, welds are solid, and no cracks, I would get it. Then you could get it ported, cleaned, and ceramic coated and use it with your next turbo upgrade. If you want it for your current setup, I would just pass on it. Your current evo manifold probably flows more and your 16g should be no where needing an external wg so for current setup, it would be a waste of $.

I am sorry about the mirror pic I will try to fix it.

 

[talon91tsiawd1]

I am confused as to why the first two pics are normal and the rest are mirrored.

Anyway, if the price is right, welds are solid, and no cracks, I would get it. Then you could get it ported, cleaned, and ceramic coated and use it with your next turbo upgrade. If you want it for your current setup, I would just pass on it. Your current evo manifold probably flows more and your 16g should be no where needing an external wg so for current setup, it would be a waste of $.

Thank you for bearing with me while I fixed the pics. I actually bought a 20g that is externally gated, so i was thinking that this exht manny would do me some good.

I was a little scared that it would not function right because the gate is not in the direct line of any of the runners, just on top of them.

 

[joeyjoe35]

Yes it will work with the waste gate port there. Just make sure the welds are good and there are no cracks.