Is this stock and whats missing...

[caspers_dsm]

I did some research, found no pictures though, this looks like a 16g..?

You must be logged in to view this image or video.

Also, "What's missing" i know i need better pictures.
Asides from a J-pipe, o2 housing, DP and exhaust, MAF and intake pipe, oil lines......can you see anything else i am missing? I mean coolant lines..other stock mitsu stuff. I know the obvious (battery, vacuum lines, etc)

You must be logged in to view this image or video.

 

[TurboTsiThatFly]

looks like you need a boost controller. and im not sure if that is the stock 14b since 2g cars came with t25 stock. it might be a 16g.

 

[caspers_dsm]

looks like u need a boost controller. and im not sure if that is the stock 14b since 2g cars came with t25 stock. it might be a 16g.

Oops. The td05 threw me off. I have an OLD profec b

 

[c4uldr0n]

Based on the compressor fins, it is indeed a 14B and has a 6cm^2 exhaust housing (from what I can make out of the exhaust housing)

 

[lenny 15]

That turbo is a 14b, look at the compressor wheel. I would use the Old style Profec B, the one with the knobs. You will need a recirculation pipe to recirculate that BOV.

 

[caspers_dsm]

That turbo is a 14b, look at the compressor wheel. I would use the Old style Profec B, the one with the knobs. You will need a recirculation pipe to recirculate that BOV.

I have a "jewel"...at least to me anyway. Its a JDM (i am no JDM fanboy) Greddy type-s. I have had it since i sold my beloved FD in 1997.

You must be logged in to view this image or video.

I believe with the type-s you can let it vent to atmosphere, right?

 

[BoostedinSoFla]

Recirculate the type S unless you're going to get a MAFT setup.

 

[caspers_dsm]

Recirculate the type S unless you're going to get a MAFT setup.

Thanks!

 

[caspers_dsm]

I believe with the type-s you can let it vent to atmosphere, right?

Wrong.

 

[caspers_dsm]

I am a bit confused.

I found a 16g for sale on this site, in the classifieds. In the pictures, it is identical to the one i have, all numbers, etc..

Anyway i can confirm, before i buy a new turbo? (sorry guys, i am used to garretts..)

 

[1slo1g]

look at the fins of the 16g it should have double fins

 

[caspers_dsm]

look at the fins of the 16g it should have double fins

Thanks for the clarity!