buschur fmic piping question

[talon187]

ok i just got a buschur fmic core. Not the newer one the one they had before that i got it dirt cheap. the reason i got it cheap was the end tank got messed up but im having it welded and fixed. my real question is this. It is a short route intercooler core would a fmic piping kit do the job? or anyone know a good place to get the pipes? any info would be a great help thanks

 

[surgeon_general]

Well i have a a buchur kit, the kind that the endtank couplers point torwards the firewall. the things you are going to need pipe it are the follows.

1: some sort of 90 coming from the throttle body
2: a 45 degree bend downward.
3: a 45 degree bend to make it horizontal into the endtank.
4(various straight pipe depending on how long your 45 pieces are

then on the turbo side you need
1: 90 coming from the turbo
2: straight pipe
3 90 into the endtank.

SO given you have some sort of 90 on the TB
buy a kit that has:
2: 45's
2 90's
3 2 or more pieces of straight


ALSO. i recommend buying tbolt clamps and get the couplers as 2.5 18-wheeler radiator hose from NAPA