Maft on stock intercooler pipe?

[talon187]

i wondering if you can some how run a maft with blow threw setup with out buying a hard upper intercooler pipe i plan on doing a front mount soon so i dont really want to buy the hard pipe for my side mount just to run the maft thanks for the help and input guys

 

[snowborder714]

I have never seen anyone doing this. That is not to say it's not possible, but the hardest thing I think would be to try and find reducers to fit both the MAF and then the stock uicp. I also don't know if the stock uicp would be able to support it. I would just wait until you install the front mount to put in the MAF since you're doing it soon.

 

[tkelly27]

My stock UICP (and lower for that matter) is 1.75". I'm going to be using an intercooler that has 3" inlets and outlets (same as the GM MAF!). I have to make custom adapters because I think what I'm about to show you is goofy. You could theoretically get two of these

http://www.siliconeintakes.com/prod...d=513&osCsid=e3ac36a5529f9a8700add468cc9dd022

and then two of these

http://www.siliconeintakes.com/prod...id=64&osCsid=e3ac36a5529f9a8700add468cc9dd022

and some 1.75" and 2.5" pipe to couple them together. Sounds like a waste of time and money to me.