EGR Removel

[cobb]

Hey guys i realy need someone with a 99 GSX or GST to help me out here... I have removed the EGR valve and now removing the lines and found the gas tank pressure relief and i need to know what the sensor is on the left side of the intake manifold that is hooked up to the two vaccum lines that go across the intake right after the TB.. and if i will have to keep the sensor that was hooked up on the vaccum canister that was located behind the left side of the bumper. I know this might need pics but its got to dark for me to realy be able to take a good pic. I just need to know if these sensors need to stay hooked up and and what their purpose are. If anyone can help it would muchbe appricated. Thanks

 

[Nicks2319]

http://members.shaw.ca/dsm.1000q/Engineprimer/2G/visual-index.htm

Keep the sensors plugged in, but remove the lines. You may throw codes.

 

[cobb]

Ok i im not talking about the sensors on the fire wall i know that i keep them plugged in this sensor is attached to the Intake manifold "under" the fuel rail.

 

[cobb]

ok found out what it was and know now what to do thanks for the help.