Walbro Install Question

[xxShaneOmac]

Im doing my walbro install,
And Im about to add the Walbro to the fuel pump assembly.

But Im stumped on how to re add the positive and negitve wires.

My old pump was a Denso 150lph, So it has little o clips that go on a screw and is held down with nuts on the + and - sides.

What kind of wireing or harness clip do i need to get the wires into the Walbro?

Thansk

 

[cbassgsx]

a walbro should have posts and nuts too
http://www.vfaq.com/mods/pump-WB-1GAWD2-print.html

 

[xxShaneOmac]

Im sorry for not claifying
I have a 2g AWD Walbro No post.

But I guess I might not need the post if I get the harness, The one that didnt come with the package dang.

And when I put everything in the assembly it is way off, The screw dosnt line up beacuse my walbro is 1/2 size of the Denso that was in there.

AHHHH

Or Do I not put the pump in the normal way with the screw?
Do I just put it in with the filter faceing where the screw goes and use a zip tie to secure it????

 

[twiztedgsx]

for starters where did you get the pump from? i have a walbro 255lph in my 2g gsx which i bought from slowboy racing and it was a direct plug and play pump harness and all...i didn't have to deal with nuts or bolts when installing it.

 

[xxShaneOmac]

My Walbro had everything needed,
And my Fuel pump assembly has a wire harness w/ wires on it,
But beacuse I had a Denso 150 pump the wires hooked up to that pump witch uses to screws and little o connectors and nuts on top.

So some how i need to remove that harness or splice it to a Walbro [ oem? ] Wire harness so I can plug my walbro in..

This is what im thinking.
Ill take pictures when I get home.

 

[xxShaneOmac]

anyone know anything?

anyone know where i can pick up the wire harness that connects to the walbro and has a + and a -

 

[Nors]

check importevolution I think they have it.