SAFC Problems/ whats going on

[1gengsxz3]

so i installed my safc yesterday and now my car is acting all funny. it won's even drive now i turn it on and it drops rpm's and dies what is going on i've tried to set the safc up and nothing i've tried unplugging it and nothing i can't figure out what is happening. some one please tell me whats up i set it to karman and the throttle postion with the arrow pointing up. now what the heck do i do im so lost i can't even drive to work so i need to fix it today. any help out there?

 

[Street_Killer]

What are the hi and low thorttle settings at? Do you have it set to 4 cylinders? Make sure the arrow is up and to the right.

 

[1gengsxz3]

there set at 30 and 80 and yes it's set to up pointing to the right and 4 cyl

 

[spyderturbo007]

Did you remember to cut the MAS wire after you tapped in with the SAFC? Also, remember that one of the grounds has to be closer to the ECU than the other.

 

[SBR Joe]

Double check all your connections, use this diagram as a reference to make sure all the wires are hooked up correctly. SAFC Wiring


Joe
SBR

 

[bling5tatus]

I thought it must be set to 2 cylinders since the coile packs are 2x2 to make 4 seperate spark plug wires and one coil being energized sparks two plugs at once..... can someone clarify this for me?