Just bought a turbo, what parts do I need for bolt-on?

[eboy0]

Hey guys, finally got myself a turbo coming in. bought it from a local member here, it was the Bulleye 50 trim in the classifieds.
Any who, SBR is kinda difficult to reach, and with my phone being really hard to hear anything, Bullseye tried to help, but kinda couldn't answer my question.
I'm looking for a direct bolt-on to my manifold, which I'll port out and such.... is it true that the only thing i will need is a new return line and that's it?
http://www.slowboyracing.com/estore/product.php?productid=5466&cat=4335&page=1

 

[oldman]

Get yourself a set of new OEM turbo bolts.

 

[spinz4]

You should get some gaskets as well. Turbo inlet, o2 housing, downpipe, and the oil feed line copper washers (unless you have a braided line). I would also do an oil change.

 

[Xeiros]

You'll need coolant too. When you remove the coolant lines from your old turbo, they will gush out coolant (that is if you didn't drain it before hand, but you'd still need coolant in that case).

 

[eboy0]

Alright, but what do I need in terms of oil supply? I don't think this turbo will bolt right up to my stock oil feed/return lines. Do I need one of these kits right here to make this work?
http://cgi.ebay.com/ebaymotors/Comp...tegoryZ33742QQihZ007QQitemZ170108734612QQrdZ1
Or, do I only need a return line? Anyone?

 

[Cs4g63]

If you go here you can scroll through the options and select the one you need.
feed line http://www.extremepsi.com/store/customer/product.php?productid=17334&cat=263&page=2&veh=1G DSM
return line http://www.extremepsi.com/store/customer/product.php?productid=17785&cat=263&page=2&veh=1G DSM

 

[eboy0]

That's the problem, I don't know which one I need... one of the reps told me I need a new return line, and SBR told me I needed a new feed line.... I don't want to wait till the turbo gets here to then order the supplies, I wanted to order whatever I needed now, so when the turbo gets here I can just drop it all in..

And as for changing the oil... of course I will, , I change my oil when I pop my valve cover off...

 

[Thomas91169]

you should just buy a 2g install kit from one of our vendors.

 

[eboy0]

you should just buy a 2g install kit from one of our vendors.

A link in the right direction would be great, thanks.

 

[Xeiros]

The problem with buying one of those kit's, is that you'll end up with parts that you might not need, such as the j-pipe. Granted, that might be the only portion that you DON'T use, but thats also a good portion of the price for some of these kits.

Basically this is what I'd recommend you pick up.

Oil Feed line (specify what type, i.e. bullseye)
http://www.extremepsi.com/store/customer/product.php?productid=17334&cat=336&page=1

Turbo to mani gasket
http://www.extremepsi.com/store/customer/product.php?productid=17335&cat=336&page=1

Crush Washers
http://www.extremepsi.com/store/customer/product.php?productid=19019&cat=864&page=1

Oil Return line
http://www.extremepsi.com/store/customer/product.php?productid=19147&cat=336&page=1

 

[eboy0]

Thanks for the reply xeiros, but you're a lil late just put in the order for one of these this afternoon.
http://cgi.ebay.com/ebaymotors/Comp...tegoryZ33742QQihZ007QQitemZ170108734612QQrdZ1
Looks like it'll work... the guys @ sbr have a nice setup... but wanted me to get the really expensive return and supply lines.
And guys @ bullseye wanted 145$ for the return/feed lines...

 

[staticbrainwash]

The bulls turbos are ball berring correct? If so, make sure you either get a restrictor from the filter housing, or you feed from the head. Ball berring turbos don't like that much oil pressure. My .02.

 

[eboy0]

The bulls turbos are ball berring correct? If so, make sure you either get a restrictor from the filter housing, or you feed from the head. Ball berring turbos don't like that much oil pressure. My .02.

Good info, I'll find out tomorrow...

 

[gsxtasy]

I really doubt its a ball bearing turbo, should be fine off the filter housing. Should check just in case, but i really doubt it. Good luck.

-aaron

 

[staticbrainwash]

Doesnt hurt to know to look out for it though.

 

[eboy0]

You must be logged in to view this image or video.

It's here!! O yah, install kit should be here soon aswell....