The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

would a 2g maf upgrade on a 1g give any power gains?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

You will probably notice a difference in spool up times. But as far as any noticeable HP gains no, unless you are running like 350+ HP then you might gain some HP due to the 1g being more restrictive.
 
You will probably notice a spool diffference like stated above.

If you do do this though make sure you put in 550's to help compensate the increase in airflow. An safc helps tons to further tune it down.
 
If It's of any use, when I installed 2G maf and 550's, It allowed me to raise my boost (overrunning 1G maf) and gain 5+ MPH in the 1/4 mile. I would recomend this mod.
 
what kind of power will i be pushing untune with just the keydiver chip, the specs i have on 21-22 psi to the wheel?

Thats bench racing so no one will answer that. You will need a 2g maf if you want to run that boost. Also you cant just through it in you need fuel adjustment or you will run real lean. So safc, dsmlink or keydriver burned for 2g maf is needed.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top