VRS 3'' turbo back exaust

TalonTsi31 · 03-17-2007, 06:28 AM

hey guys a while ago i got an awsome dealon a 3'' stainless steel VRS exaust. i only paid 450 for it with 600 miles on it and it looks brand new the guy threw in some other odds and ends if you will to. an a-pillar with 3 phantom gauges, turbo xs dual stage mbc, o2 sensor, ect.
any way my question is does any one have a 3'' VRS and know what it sounds like id like a sound bite. but testimonials would be great to. thanks

mnetwork · 03-17-2007, 12:47 PM

I got one off the classifides for around 450.. I love the sound, I don't have a clip, but I always get compliments on the sound all the time. Great exhaust, only thing is the hangers don't have ends on them so it'd be nice if you welded your own ends on the hangers.

DSMboostin15 · 03-17-2007, 02:15 PM

I have one and the sound is great. Nice and low at idle and a growl at WOT. Too bad I don't have a sound clip.

TalonTsi31 · 03-17-2007, 08:41 PM

could either of u guys do me a huge favor and take a sound clip with a cell phone or somthing. it would be much appriciated
thanks

DSMunknown · 03-17-2007, 08:55 PM

Try searching here.

Or look through the long "Post Exhaust Clips Here!" thread.

Or you could simply throw it on and hear it for yourself... and then post a clip or two for the rest of us.

TalonTsi31 · 03-18-2007, 06:44 AM

Or look through the long "Post Exhaust Clips Here!" thread

Or you could simply throw it on and hear it for yourself... and then post a clip or two for the rest of us.[/QUOTE]

thanks for the link i have alot of work i need to finish on my engine before i put my exhaust on. so when im done ill post a vid with a sound clip.

fourreGsixty3 · 03-18-2007, 07:02 AM

http://videos.streetfire.net/search/...74012f130a.htm

It sounds dead sexy, and after lot's of choices its what Im going with.

TalonTsi31 · 03-18-2007, 07:20 AM

Quote:

Originally Posted by fourreGsixty3

http://videos.streetfire.net/search/...74012f130a.htm

It sounds dead sexy, and after lot's of choices its what Im going with.

there is another clip on there and it sounds clearer. check out this clip abouth half way through he revs it and you can hear the exhaust.
http://videos.streetfire.net/search/...e2012cfbf3.htm

DSMunknown · 03-18-2007, 11:02 AM

There you are, Dustin! Name: untitled56368.bmp
Views: 229
Size: 1.8 KB

wvturbo2 · 03-18-2007, 11:17 AM

i think all 3 inch exhausts sound bout the same on our car.

90laserRSfwd · 03-18-2007, 04:19 PM

but an open 3" down pipe with a 35r sounds really mean

90_Turbo_Clipse · 03-18-2007, 04:27 PM

Its one of the best sounding exhaust I have heard. I alwaysget compliment on mine.

Morpherex · 03-18-2007, 04:36 PM

How loud would you guys say it is compared to the Apexi N1? haha.

DSMunknown · 03-18-2007, 05:22 PM

Quote:

Originally Posted by Morpherex

How loud would you guys say it is compared to the Apexi N1? haha.

I don't know. Why don't you get a decibel meter and measure the difference.

mnetwork · 03-18-2007, 05:59 PM

I had an Apexi N1 before my VRS 3".. way different.. way louder and sounds better. It's not stupid loud though.. it's a very nice tone. I'm always being told how sick it sounds..

Morpherex · 03-18-2007, 07:23 PM

Quote:

Originally Posted by mnetwork

I had an Apexi N1 before my VRS 3".. way different.. way louder and sounds better. It's not stupid loud though.. it's a very nice tone. I'm always being told how sick it sounds..

You're saying the VRS is louder?

mnetwork · 03-18-2007, 11:24 PM

Yes.. Think about it.. N1 is 2 1/2 inch plus it has a resonator in the middle.. the VRS is straight through piping and 3"... Much louder than the N1, but not crazy loud.

Morpherex · 03-19-2007, 12:19 AM

Quote:

Originally Posted by mnetwork

Yes.. Think about it.. N1 is 2 1/2 inch plus it has a resonator in the middle.. the VRS is straight through piping and 3"... Much louder than the N1, but not crazy loud.

N1 is 3" ;3 with two resonators I think at the end. At least the 1g's is. Reason is I'm deciding whether I should get the 2.5" vrs and sell this apexi lol.

mnetwork · 03-19-2007, 08:03 AM

My N1 was 2.5 inch and had one resonator. I like my VRS way way more, I'd suggest it. Try grabbing one off the classifides, thats what i did and I got the whole turbo back for 400 bucks new.

aznrabbit280zx · 11-19-2007, 01:45 AM

These exhausts sounds really nice. with a real nice roar sound. I'm definitely getting the 3 inch vrs exhaust.
Wondering if anybody knew if a Catalytic Converter heat shield would fit around a 3 inch test pipe, if anybody happened to know this. j/w btw.