Cams for my 6bolt

[thilaksharma]

Im not running a DSM 1g or 2g
Im running a 6 bolt stock JDM vr4rs motor
with an evo3 gearbox
a hybrid turbo , 7cm turbing housing , t04e 46trim compressor & garrett .50 housing.
2.5"inch downpipe gradually to 3"
560cc injectors , walbro 255
microtech lt10s ecu

need your comments on the cams that will be suitable for this setup
im currently getting around 340whp with a 1.6bar of boost.

on my mind i have a choice of
HKS 264
HKS 272
FP2 Comp 200'
Brian Crower 272

below is a pic, of my bay, thanks guys in advance
http://img147.imageshack.us/img147/6171/copyoftlak2196vp0.jpg
http://img147.imageshack.us/img147/5170/copyoftlak2203jm9.jpg
http://img138.imageshack.us/img138/3008/tlak141819lj.jpg
http://img503.imageshack.us/img503/770/tlak142011dt.jpg

 

[MyÜberFastGSX]

The BC 272's are great cams.

 

[thilaksharma]

bt are the 272 suitable ? thank you

 

[Spooling99]

You should see very noticable gains up to with the 272's over the 264's. You should take a look at the FP series of cams as well they're very nice cams as well. I have FP2's and I noticed alot even with my 14b.

 

[Cs4g63]

I say the BC 272's because of the nice price tag that goes along with the quality of craftsmanship.

 

[MyÜberFastGSX]

I say go with the BC's

 

[thilaksharma]

thank you
although BC's in my country costs around $459 , i guess i will try it out.

 

[blackGSX2g]

You could try DKS 264/272s. They only cost $350 for the pair here in the states.

http://www.ffwdconnection.com/cams.shtml

 

[thilaksharma]

blackGSX : nah , DKS doesnt reach the asia region , i guess BC 272 , with international shipping + tax , would cost me , $480-$500

BC's in my country runs for around $480
HKS are around $520

 

[TSimage]

I use the comp 101200s and have been a lot more pleased with their driveability than my friend with his 272s and in the upper power range the 200s dominate the 272s.