safc 2, please help?

[boosted96esi]

this question isnt for my car its an awd 1g, 50 trim set-up and bolt ons to go with it (sorry dont know exactly what all is done to it, but the question is, to just run low boost 10-12psi on stock injectors, what does the afc set to. The car used to have i think 682cc injectors and the afc was set for them, looking to just make it run drivable with stock injectors, any info would be appreciated(if we get the car running right its gonna be mine ) thanks

 

[boosted96esi]

sorry i should have added that we zero'd everything out and set the fuel pressure back to stock and it just doesn't want to run for sh*t...or is that what needs to be done there's just other problems?? thanks

 

[SharonTampons]

Assumming you are logging your pulls/runs I would set a baseline -14% to -20% all the way across the LO and HI side on the AFC. This is not the magic number. but this should get you in the ball park.

what exactly is the car doing? will it run at idle?
is there a posibility of a boost leak or maybe the MAFS is unplugged. (ive had it happen to me before and i thought i was the tune)

 

[spyderturbo007]

Assumming you are logging your pulls/runs I would set a baseline -14% to -20% all the way across the LO and HI side on the AFC. This is not the magic number. but this should get you in the ball park.

Woah, back up the truck. Did you just tell him to set the SAFC to -20% on stock injectors? Are you trying to get him to blow up his car or do you just have no idea what you are talking about.

Please don't post if you have no clue what's going on.

To the original poster:

Did you just install the SAFC or was it existing and you just swapped out the injectors?