PTE SCM turbo oil return

[my98GST]

I have an EXTREMELY bad oil leak coming from the ExtremePSI.com install kit. it is a -an fitting, a tube, and another fitting and it is a push on. The oil is leaking out of the push on through the front of the fitting that screws on to the male threads on the fittings of the male (mounted to oil pan) What can I do for another oil return? Surely theres another option?

 

[fulanititoo8198]

Same thig happened to me I did a temporary fix and drained the oil let it dry and rtv'd the crap. I believe FP makes very good oil return lines if I have any more leaking problems I'll go to that. Also make sure it's installed correctly. As in the ss line snug and seated in the fitting.

 

[my98GST]

yeah well I RTV the shit out of mine and it still leaks very bad.

 

[fulanititoo8198]

yeah well I RTV the shit out of mine and it still leaks very bad.

Did you completely drain you oil? and clean the surfaces making sure they're dry? RTV usually doesn't work unless the surfaces are complety dry and you allow to properly heal.

 

[my98GST]

yes, everything was fine... its bad... it leaked out almost a quart today

 

[Steve Hebert]

Keep us up to date, I'm installing mine in the next couple of weeks

 

[Cs4g63]

Im glad to hear this I was going to order that set up this week. If you find something that solves the problem or is just a better product share the info.

 

[my98GST]

Okay first off. If you laugh i'm going to kick you in the nuts......

I made a stupid and forgot to tighten one of the allen bolts that holds the fitting on the oil pan so that was the "main" cause of hte big leak. Second I reteflon taped the threads and torqued the living shit piss out of the female fitting and it seems to have done a lot better but still drips a tiny bit.. I ordered a new fitting to see if one of the threads were boogered or what not.