Need advice on turbo upgrade

[maroongstman]

Hey guys Im upgrading my turbo from a 60-1 because I want something bigger. I have a built bottom end with hks272/272 cams, stock valvetrain, sbr intake manifold, dsmlink, etc... Looking to get around 575whp on race gas.... Originally I wanted the fp3065 but I already have a tubular manifold with a tial wastegate and I know the fp3065 comes with the wg on the turbo... Now I have narrowed it down to the fp red, pte gt35r, or the pte 6152E-GRLS Dual Ball Bearing Turbo. Has anyone heard much about these ball bearing pte's? Thanks guys..

 

[JayRolla]

Im not sure about the other but I would go with the gt35r. I think people have made over 500 on pump with that turbo.

 

[Tony90TSI]

Im not sure about the other but I would go with the gt35r. I think people have made over 500 on pump with that turbo.

Yep there is a talon intown with that turbo that ran 10.6 @ 117?. Not sure on the MPH as i know it was low since he broke 4th gear and let it coast on through. The car dyno'ed somewhere around 550 to all 4 and he said it still had some left in it. Great turbo choice either way.

 

[greengoblin]

My votes for the gt35r

 

[GVR4592]

Is your manifold flanged for a stock turbo or T3?

 

[rst95eclipse]

GT-35R will give you want you yearn for. I'd recommend Precision, but I am biased.

 

[SBRChance]

Yes, these guys know a thing or two it sounds like! haha. The Garret GT35R will support almost anything you want to throw at it with staying in the T3 world. I have a buddy that is running 750 horse in an SR20 with a 35R I built for him with a .92 AR wheel! So I think it would be a great choice! Give me a call here at Slowboy if you want, I will try to get you what ya need!

Thanks
Chance D.
1-724-349-8417 ext 18
www.Slowboyracing.com

 

[2gGSX]

Just in case it makes a difference, GT35R and SC61 use the same compressor wheel