Turbo xs type H

[JBDdsmer610]

I got a tyoe h from my friend i was just wonder if the spring can be adjusted?

 

[copper_gst]

Yes it can. On my friends Turbo XS we just added washers inside to make the spring harder. That is what his kit from Turbo XS said to do and it worked just fine.

 

[JOEY A]

There really isnt a need to use a aftermarket bov, your stock on crushed is more than enough.

I run 26psi on a crushed 1g bov.....

 

[4BangR-x]

The type H is an open atmosphere dump. That is a no no.

 

[brute]

There are two models.

One with the recirculation side

You must be logged in to view this image or video.

And one with the "horn" atmospheric

You must be logged in to view this image or video.

 

[4BangR-x]

There are two models.

One with the recirculation side=Racing Bypass Valve Type 25

You must be logged in to view this image or video.

And one with the "horn" atmospheric=Blow Off Valve Type H-RFL

You must be logged in to view this image or video.

This is the type H he is refering to...

You must be logged in to view this image or video.

If its not, maybe the OP could verify

 

[Jeff822]

The bottom one is the one i gave him, his 1g was broken and needed a replacement.

 

[DSMunknown]

Just make sure you have that 90* elbow for the installation. If you don't have it, you will run into serious hood clearence issues. But I'm sure your friend took care of you.


Here we go.

You must be logged in to view this image or video.

It's the pretty shiny thing right in the middle of the photo.

 

[Jeff822]

Yea, its all there, someone gave it to me complete and i had no use for it so i gave it to him.

 

[siceclipse]

imagine if he didnt have the 90* bend and just cut a small 1.5" hole in the hood!

that thing would be loud as fuct!