What type of nuts do i use for the turbo bolt?

[Fabian972]

I removed my heat shield to pb blast the turbo and o2 bolts and I notice that i have 2 of my turbo bolts missing. Inspect DSM before buying. Anyways ### kind of nut do I use for the turbo bolts? Help please !!! Can I use exhaust manifold nuts because i didn't find any turbo nuts on Slowboyracing website.

 

[diablos991]

Turbo nuts??? They are just bolts that go down into the exhuast housing of the turbo from the exhaust manifold.

On the stock t25, there is 1 stud and 3 bolts. I would recommend just removing this stud and replacing it with a bolt.

EDIT: If you are getting ready for turbo removal, I would also PB blast the Downpipe bolts, the o2 sensor and the water lines on the turbo.

 

[Fabian972]

Turbo nuts??? They are just bolts that go down into the exhuast housing of the turbo from the exhaust manifold.

On the stock t25, there is 1 stud and 3 bolts. I would recommend just removing this stud and replacing it with a bolt.

EDIT: If you are getting ready for turbo removal, I would also PB blast the Downpipe bolts, the o2 sensor and the water lines on the turbo.

I didn't see thread on the turbo housing the 1st time checked agian with flash light saw it thanks o yeah pb the hell out of it i bought two cans of it.


who many washers do you use on the turbo bolts SB racing sells them single or in a set of eight how many do i need i thought only needed four. thanks diablo

 

[diablos991]

There are 2 on each bolt. (there were when I did my turbo swap)

Both go between the bolt head and the exhaust manifold.

 

[Fabian972]

There are 2 on each bolt. (there were when I did my turbo swap)

Both go between the bolt head and the exhaust manifold.

Alright thanks agian diablo saved my ace!!!!

 

[diablos991]

Anytime, you can call me Shawn if you like.