Slave cylinder install, any advice?

[katz]

Hye, I'm about to install my slave cylinder and was wondering if anyone has any advice to make things go more smoothly. It's on a 90 gs-t. Thanks for any input.

 

[wret]

Bleed, bleed, bleed.

 

[Strm Trpr]

getting air out of the slave cylinder can be a PITA.
I tried this method http://www.dsmtuners.com/forums/showthread.php?t=213503 and it worked like a charm.
Give it a shot.
Before I knew about this method, my wife and I went thru almost 2 pints of brake fluid trying to get all of the air out.

 

[DSMvroom]

2 jackstands
10mm flare wrench (just do yourself a favor and buy it if you don't have one. It'll just ruin your day if you don't)
2 small (or 1 large) bottle of DOT3 brake fluid
1 friend
18" of 1/4" vacuum hose (or the next size down will work fine also)
1 empty container you never want to use again

 

[katz]

Hey, thanks for all the replies and the article you linked to is really good, strm trpr.
Thanks.

 

[ericbev]

http://www.plymouthlaser.com/slave2.htm

 

[robs90tsi]

http://www.dsmtuners.com/forums/showthread.php?t=213503&highlight=bleed
Make sure you bleed it correctly, I just did mine, had to re-bleed. Follow this.