Is a 2G port O2 housing efficient enough for a TD06H 20G

[DSMSpyder99]

Simple question is a ported 2G o2 housing good enough for a internal wastegated (38mm flapper)TD06H 20G i porbably wont go over 16psi street and 20psi track

 

[boostineclipse]

Yes a ported 2G O2 housing will be plenty for a 20G.. I am using that same turbo and have yet to see any limitations with the O2 housing

 

[L2RTSiAWD]

Agreed.

It shouldn't be a problem, and if it is you can always upgrade.

 

[KeltonDSMer]

Remember, the less boost you are running, the more the wategate passage on the 02 housing has to flow in order to control boost pressure. IE: It will be harder to control 16psi consistantly than it would be at 20.

The only way to tell is to try it. You might creep so much that the boost controller has no effect, but this would just be a good excuse to dump the O2 housing into the atmos.

 

[DSMSpyder99]

cool thanx for all the replies i guess ill just port my o2 housing if worst comes to works ill upgrade. Later on i might upgrade to a profec-b 2 or the Apexi AVC-R (i hope they upgrade the look soon to the SAFC) so maybe that will do better than my Hallman MBC