log ok?

[Polyol]

mods om profile current hi th. on afc set at -19 across the scale

3rd gear pull

RPM TIMING O2 TPS
3324 6 .93 43
3888 10 .91 98
4464 7 .93 98
4916 8 .95 98
5280 11 .95 98
5652 13 .93 98
6028 16 .93 98
6336 17 .93 98
6564 18 .91 98

[Staytuned]

Looks good to me for a stock setup.

[Polyol]

sorry about that. I updated my profile I guess i didn't save it
please advise

[Staytuned]

Still looks good so far. Might be getting leaner near the end where it hits .91 from .93.

[scottsee]

Looks good to me, whats with the slow sample rate?

[Polyol]

what do you mean? the gaps in rpm? if thats what you mean is the a way to slow it down on the logger?

[Polyol]

3rd Gear Pull

1st Pull

Rpm 02 Timing
2932 .71 16
3108 .71 9
3384 .89 8
3708 .89 10
4020 .91 11
4328 .91 11
4612 .91 11
4904 .93 11
5160 .93 10
5368 .95 12
5596 .95 13
5788 .95 14
6000 .95 15
6124 .93 16
6284 .93 16
6432 .93 16
6564 .93 17
6688 .93 17


2nd Pull

3468 .87 6
3800 .87 10
4104 .89 11
4428 .89 10
4692 .91 10
4960 .91 11
5216 .93 12
5468 .93 13
5696 .93 14
5868 .91 15
6072 .93 16
6232 .93 16
6400 .91 15
6516 .91 17

[spyderturbo007]

Looks pretty good. I see a slight timing pull in the first log at 5100, but it's gone in the second log. That means it's most likely due to an increase in coolant temp or IAT.

Like scottsee said, you really should get your samples/second up on the logger. What program are you using? What boost are you running? I would also like to see a log with airflow added. You log looks good enough to raise the boost on, but we need to look at airflow before and after to make sure we aren't raising it unnecessarily.

[CanadianTSi]

Those logs look just peachy, if you try to get it any better then that you'll go crazy "tuning" your car everyday...

[Polyol]

My boost is around 15-16 psi, I'll make a log with air flow. is'nt the sample rate better on my last two runs. The program is palm n stien.
Thank's for your input