first log

[appleyard777]

ok i dont know how the hell do get it on my computer i followed the instructions fully on palmnstein i have no idea how to get the file i save on my pc! any help would be appreciated but this is what i can gather by replaying it and pausing it by frames ... This is a 3rd gear with an evo 3 16g, FP2 cams, fmic, full exhaust, SAFC II -10 across the board on 22psi (pump gas)

Rpms, o2v, timing

3rd gear
4289, 0.93, 5
4699, 0.93, 5
5082, 0.93, 6
5511, 0.93, 9
6000, 0.93, 11

[LRS95TSI]

well the logs don't have enough data. when i use pl viewer to look at my logs i just use the function prnt screen button, copy it into paint and then host it on here...you need to go from 2500-redline...i'm guessing you dont have a wideband?

also, i'm very curious, because i have the same setup as you and i'm -40 across the board on 20psi, with a good afr, but in no fashion should you tune your car to those numbers!!! i'm not responsible lol...get a better log and repost!

[appleyard777]

Originally Posted by LRS95TSI

well the logs don't have enough data. when i use pl viewer to look at my logs i just use the function prnt screen button, copy it into paint and then host it on here...you need to go from 2500-redline...i'm guessing you dont have a wideband?

also, i'm very curious, because i have the same setup as you and i'm -40 across the board on 20psi, with a good afr, but in no fashion should you tune your car to those numbers!!! i'm not responsible lol...get a better log and repost!

-40!! damn well ive only got 550's, and a 190lph with fp2 cams, evo 3 16g, fmic, turbo back, etc etc, at 22psi. That seems helllla lean if your safc is -40 across the board, ive had a wideband hooked up once and when i was at -23 across the board on 20psi it started going lean in the upper rpms, that was before cams, cams gave quite a bit more air flow, so at -10 it seems to do fine, but i need to get the wideband back up on it