The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

how long can i wait?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

97eclipseRS

20+ Year Contributor
1,321
2
Jan 14, 2003
Ft. Myers, Florida
i will be putting 17" mr7's and eibach pro-kit springs on my car soon and was just wondering how long i would be able to go before i put on shocks and a camber kit? sorry if this question has been repeated:dsm:
 
The easisest solution would to just do everything at once, being you'll have the suspension all out at that time. This way you don't do the same job twice, basically. If you can't wait for everything, though, atleast be sure to do the camber kits with the springs, and don't forget to get a 4-wheel alignment after everything is installed, this way you don't eat up your new tires. Without the shocks you just might have a bumpy ride, especially if your stock ones are blown....or close to it.
 
I've got the Eibach ones from Tirerack on the front. ~90 bucks for both sides. You have to have them pressed though.

I just used the rear camber mod for the rear. ~22 bucks total.

Both seem to have worked great. I got an alignment and both front and rear are in spec.

Vfaq Rear Camber Mod

Eibach Camber Correction Kit
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top