The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

2G FWD setup... but close to stock height

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

95TSiNewbie

15+ Year Contributor
393
0
Dec 8, 2003
Saint Charles / DeKalb, Illinois
I just recently started thinking about getting suspension upgrades to help with my horrible wheel hop (motor mounts on order). And was wondering what shock/spring combos people are using that are close to stock ride height. THe furthest i want to drop is an Inch because roads around here suck because of all the salt used in the winter. I was reading up and was thinking maybe Tokico HP's with H&R OE's.... sound good? :confused:
Any input would help a lot.
Thanks guys/gals,
Bryan Tracy
 
i've got the tokico HP's and Tein S-tech springs......dropped me just barely over an inch and the ride is real smooth.
 
H&R OE Sport springs and Koni Sport shocks. The former don't drop you much (but are stiffer than stock) and, when set to about a half turn off full stiff, the latter would have the right amount of rebound damping to help with the wheel-hop.

- Jtoby
 
I dont know to much about the Koni's... the little i have read about the seem not to fit all that well. I will be having them professionally installed seeing how I have never done any suspension work of any kind. Koni yellows and H&R OE's would be a slight drop but stiff? Sounds good to me :thumb:
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top