mechanix565
10+ Year Contributor
- 165
- 1
- Apr 19, 2009
-
Pawtucket,
Rhode Island
soo just completed my fwd auto gst ti awd 5 speed swap car cranks but wont start
also converted ot to a 99 spyder black box ecu and did fuel pump rewire. motor is getting fuel but i havnt checked for spark yet. ecm was reflashed already so its got the right rom in it. fuel pump kicks on and i can smell fuel in the intake so i know the injectors are firing. im using an automatic harness but i seem to have all the neutral safety wiring correct because it cranks woth the key and reverse lights all work fine. car ran before i started this swap. also installed an maft an set it to stock settings. is there anything im missong going from auto to manual that will cause a no start? im gonna check for power at the coil tommorow as well as put the stock maf back on and try that. i have no o2 sensors in it ight now either but it should still fire i would think.
also converted ot to a 99 spyder black box ecu and did fuel pump rewire. motor is getting fuel but i havnt checked for spark yet. ecm was reflashed already so its got the right rom in it. fuel pump kicks on and i can smell fuel in the intake so i know the injectors are firing. im using an automatic harness but i seem to have all the neutral safety wiring correct because it cranks woth the key and reverse lights all work fine. car ran before i started this swap. also installed an maft an set it to stock settings. is there anything im missong going from auto to manual that will cause a no start? im gonna check for power at the coil tommorow as well as put the stock maf back on and try that. i have no o2 sensors in it ight now either but it should still fire i would think.
