Resolved 1G 90vs91+ wiring for EVO VIII ecu swap

[O HAI]

Im almost done with my evo 8 ecu in my 1g. I found pinouts and the swap is actually pretty easy, the only problem is every pinout is for a 90. I was wondering the differences between the wiring i know that pin 6 and 14 are swapped and was wondering if that was the only difference or not. Thanks in advance

 

[steve]

The only difference in the ECU harness pinout between 90 and 91 is 6 and 14.
Most of the diagrams your going to find are for the 91+ wiring where pin 6 is Green/White wire to the MAF and pin 14 is the Green wire to the IPS.

For example:
http://www.dsmlink.com/images/forums/1GECUMFI.pdf
http://www.dsmlink.com/images/forums/1GECUPinout.pdf

 

[O HAI]

The only difference in the ECU harness pinout between 90 and 91 is 6 and 14.
Most of the diagrams your going to find are for the 91+ wiring where pin 6 is Green/White wire to the MAF and pin 14 is the Green wire to the IPS.

For example:
http://www.dsmlink.com/images/forums/1GECUMFI.pdf
http://www.dsmlink.com/images/forums/1GECUPinout.pdf

Thanks for the conformation, I was just making sure before i try to put the ecu in.