??? About Release Fork and SC

[Mike1992]

I push in my clutch pedal and the fork pushed the TOB over to the clutch i let off and the fork barely moves back, maybe this is why im grinding trying to get it into any gear. How much travel should the fork have side to side by it self without help, I dont think my fork is moving enough to release the clutch I just replaced the clutch TOB and pressure plate whats the dealio?

 

[wastefuldreamer]

What clutch did you put in?

 

[Mike1992]

I went with a standard grade exedy clutch kit

I am getting this weird squaling noise upon startup that lasts maybe 3 seconds, I though it was the starter so I put another one in and am still having the same effect, also some odd vibration.

When installing the Flywheel I torqued the 6 bolts down to 100 Foot Pounds and used red locktite and when installing the pressure plate and clutch i torqed it down to 30 foot punds with red locktite. I am wondering if something came loose, I replaced my slave cylinder today and rebleed the system. I still cannot go into any gear. The rod on the master cylinder is fully extended almost to the point where the C can fall off. I am clueless people I really need help.