Centerforce DF pressure plate+ACT disk?

[illeffekt vr-4]

I tried doing a search but only two threads showed up and those were from 2003 and had no replies.

I am wondering if anyone is using this combination in their dsm?
I currently have a Centerforce DF in my car but its starting to slip ( has about 35k+ miles on it with countless hard launches). I don't really want to get a ACT2600 or ACT2900 because the car is still daily driven and I need a soft pedal and trouble free setup.


Mods:
FP Green@ 20psi, denso 660's, walbo 255hp, Aeromotive AFPR, BJ's SMIM, ETS intercooler/pipes, DSM Link, 2g mas, 2.5" turbo back , tial 40mm, turbotrix o2 housing.

 

[Dallas J]

Yeah, it works together. Its the combo in my car.

FWIW, ACT quality seems to have been slipping recently. Friends here in the NW have been having problems with either breaking the springs out of their mounts or too much slop in the disk when set on the trans splines. The slop was causing a few people to have problems with high rpm shifting because it would vibrate in between pressure plate and clutch causing drag.

According to Lucas English (local shop owner), ACT quality is hit or miss with the discs.

-Dallas J