Master Cylinder install on a 1g awd

[talon187]

I have a new master cylinder i need to install on my 1g awd anyone have a site or some pics with step by step of what i need to do ? thanks for the help guys and when i get it installed how far should the adjustment rod be out towards the firewall ?

 

[Defiant]

Near as dammit to a 2G:

http://www.plymouthlaser.com/masterc.htm

 

[92jdmtsifwd]

i just put a clutch master cylinder in my 92 it's easy
you need a 10mm line wrench and a 12mm socket
go under the dash & when your upside down the master sticks through the firewall on your left pull the cotter pin then the pin that hold the master on the clutch assembly take the 2 bolts off on the firewall in the engine bay then taske off the hydraulic line & pull it out then put the new one in fill it up w/ dot 3 brake fluid & bleed it the only hard part is getting the pin lined up & back in it's a 1/2 hour job tops

 

[ITSME4G63]

i just put a clutch master cylinder in my 92 it's easy
you need a 10mm line wrench and a 12mm socket
go under the dash & when your upside down the master sticks through the firewall on your left pull the cotter pin then the pin that hold the master on the clutch assembly take the 2 bolts off on the firewall in the engine bay then taske off the hydraulic line & pull it out then put the new one in fill it up w/ dot 3 brake fluid & bleed it the only hard part is getting the pin lined up & back in it's a 1/2 hour job tops

you make it sound so easy