The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

major ass LINKAGE problem with 90? tran in 93?!?!

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jjsacidy

15+ Year Contributor
224
0
Jul 14, 2004
Saint Cloud, Minnesota
ok.... i THINK this tranny is actually a 90.... and its in my 93 now. the linkage that goes side to side on the stick and moves the lever on the tranny in and out seems WAY to long?! wtf?! i have the 91-94 shifter, possible 90 or 91 cables (not a ####ing clue :mad: ), im pretty sure a 90 tranny, and the 91-94 tranny bracket, and ive tried the 90 and 91-94 arm(long and shorter). on the tranny it shifts fine into the gears no problem, but theres no way the linkage will line up :mad: :mad: :mad: . im gonna try the 90 bracket as soon as i get my greasy little hands on one, but for w/e reason doubt itll solve this? cuz wont it put the arm that actually puts it in gear at an extreme angle and bind/break the cable? :confused: :mad: :confused: :mad: :confused: i could have this sweet chick magnent on the road right now :cry:
 
nobody knows y the 'normal' swap isnt an option? i guess ill try to get the other shifter then. :confused:
 
so the cables out of a 90 are the ones with 2 adjusters correct? and 91 and up only have it on 1 cable? that is what i had b4 in my car. and the shifter was not hitting the rubber bump stops. i swapped to the cables i have now with 2 adjusters and they were equal length and look identicle, even the bracket DIRECTLY holding the cables(not the one on the tranny itself). and i could get into all the gears perfect with it b4 swapping trannies. now with the new one in there it actually hits the rubber bumps up and down but side to side seems like the cable needs to be shortened. i think ill try the 90 CABLE HOLDING bracket or the 90 shifter.
 
OMG OMG OMG OMG 3 DIFFERENT CABLE BRACKETS??!?!? :confused: OMG i thought 2! i mean the ones that actually hold the cables. well its shorter with the smaller gap but the 2 are a little off of the other short one i had so.......... DING DING we have a weiner! :thumb: THANK YOU JESUS!
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

  • Wanted 2g ISO Rear Pass EDM Tail light
    Looking for only a passenger rear EDM tail light for my 2g. Please lmk if you have one lying...
    • Gabriel Pena
    • Updated:
    • Expires
  • Wanted 4G63 ISO built short block
    Looking for either a 7 bolt split thrust or 6 bolt
    • Gabriel Pena
    • Updated:
    • Expires
  • For sale 2g 95-98 Talon air bag.
    2g Talon airbag. Really good condition. Can ship ups ground. Message 702-741-6987
    • Galant665
    • Updated:
    • Expires
  • For sale 2g 1996 Eagle Talon TSI AWD
    I have a 96 Eagle Talon AWD standard tranny for sale. The car still ran when I parked it. I had...
    • eli1977
    • Updated:
    • Expires
  • For sale 2g 2g front strut shock cup. MR103156. New.
    Mitsubishi Oem # MR103156 front suspension strut cup. New. Message 702-741-6987.
    • Galant665
    • Updated:
Back
Top