FIC injectors any problems ,opinions.?

[AL92]

Going with some FIC injectors I think shorty.They are supposedly custom made for our cars and get rid of factory lower seal problem area.

Do they work fine,do they go in fine..would you buy them again.Any problems with leaking fuel or vac leaks.??

They are pretty reasonable 315 for 650 or 680 size that I figure should be ok for a evo 16 or rs49.

FIC stands for fuel injector clinic.

 

[GSX]

A search of FIC returned 41 hits, aside from parts classifieds those may give you some information to answer your question. Shoot, the fact that FICs are selling so often may tell you something.

As for personal experience:

Absolutley no seal problems what-so-ever. Then again, I have never had a problem with any injector sealing (stock, RC, FIC, ND).

I had some 750s that I sold to a fellow board member. I ran them for about 8 months (roughly) and could never dial them in. As it turns out I went to a ND 720 and have been happy ever since. Take it at face value.

Is for 'enough cc for my turbo' you should be fine if running an AFC. If you have DSMLink or something of the likes maybe step up to something bigger because of DSMLink's ability to match injector sizes in case you decide you want something bigger later - again, my experience take it at face value.

Hope this helps,