The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

how much boost on b16g

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

moonstation2000

15+ Year Contributor
88
0
Jun 23, 2003
how much can i get from my b16g?
right now i have 3" exhaust, in-line fp, 6an fuel lines, upgraded side mount ic, hacked 1g maf, o2 dump tube, 450 injectors (550 ready to go in when i get a safc) etc.
i can get close to 20psi before i start to lean out (pocketlogger) on the 450's, wondering what kind of boost i can expect the b16g to handle efficiently if i feed it properly.
 
I am at 20 psi i feel that the turbo could handle a little higher but it depends if you want to push it to its limit. I accually want to get a bigger turbo, is the 20G bolt on right up to the stock exhaust manifold, or is that the 18G?
 
Originally posted by maxperformance
I am at 20 psi i feel that the turbo could handle a little higher but it depends if you want to push it to its limit. I accually want to get a bigger turbo, is the 20G bolt on right up to the stock exhaust manifold, or is that the 18G?
slowboyracing.com has a 2g20g that bolts right up on your 2g DSM for $899
 
The Evo III 16G I have flows a bit more than a big 16G (it is probably closer to an 18G, but no one has a map to tell for sure), but with the Evo 16G, I found that I just kept on making more power if I turned the boost up. 26psi was one hell of a kick in the pants. :D
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top