spal fan wiring..

[twenty5psi]

what should i cut into for my spal fan to wire up to the stock harness?..colors i should cut and tap?..its for the primary fan,(not the ac fan on the driver side)..thanks
chris

 

[jdmawd]

Originally posted by twenty5psi
what should i cut into for my spal fan to wire up to the stock harness?..colors i should cut and tap?..its for the primary fan,(not the ac fan on the driver side)..thanks
chris

If you trace the wire past the connector to the base of the stock fan motor, its only has two wires. One is positive one is negative. I cant remember the color code its been a while, but its marked at the fan housing. the spals should be marked also. just match up the +/- and you should be good to go.

 

[twenty5psi]

sweetness..that was pretty easy..and while we are at it,whats the sensor or whatever it is that plugs into that same harness that plugs into the bottom of the rad?..that thing is hard as shiat to get out..

 

[jdmawd]

leave it in its the temp sensor that tells the rad fan when to turn on.

 

[twenty5psi]

Originally posted by jdmawd
leave it in its the temp sensor that tells the rad fan when to turn on.

btw,i forgot to say thanks..

i have the cel coolant temp sensor so thats what i change then im taking it..never overheats though..thanks again..