Cams for my build up????

[Ricerdude]

I have searched for 2 hours and i cant find what i want to know, so i am just going to ask, it should be easy. I am building a 6 bolt 4g63 and i need to know what kind of cams to put in it, my head is getting the stage 3 port and polish done to it, and i have already bought the 1mmOS valves, i also need to know what kind of springs to use, I am fully building this motor. It will be turbo, and a weekly driver, but a once in a while drager. Help is appreciated

Thanks
D

 

[AWDLATIN]

You can get som 264 intake/272 exhaust lift cams from HKS. A good number of DSMers use them. Or, you could go 272/272's as well. If you are not wanting to rev over the 7500 rev limiter mark, the stock springs and retainers will do just fine.

 

[1LE]

I second that, with the exception that if you use a VPC you may want the 264/264 combo in order to keep better idle characteristics.

 

[Ricerdude]

Do you think it is i worthless to run that car over 7500 rpms. Meaning can i get the power I want under the 7500, I dont want to see what happens to a 4g63 at 5000 rpms if the timing belt breaks or anything else, much less 7500.

Thanks,
D

 

[AWDLATIN]

You need cams if you want anything over 7500 rpms...ofcourse, thats with the limiter removed.

 

[jdmawd]

straight 272's idle perfectly with the VPC. how many more of these threads have to be posted. This question was answered 2 years ago there is no possible way you have searched.

Its wonderful that you plan to fully build the motor but without knowing what turbo yu plan to run asking about cams is pointless.

i live christmas whish lish threads ho ho ho

 

[Ricerdude]

i searched and i couldnt find anything saying what i wanted, this is not the fist forum i have belonged to, i am over 700 threads on car audio.com and I hate it when people ask stipid ass ?s without searching, I searched. I know how to do it. How am i supposed to know what i want for cams off the top of my head, I wanted to see what other people knew and what there experiences are with the stuff. I know about a lot of the stuff, but i dont know anyone with the experience with the product, all i know is what the description of the product says and possibly a little more. But if it really offended you then I am sorry. Thanks for the info. Aho yeah, I am planning on running the RS43 or RS49, with an external HKS wastegate, 770 injectors, stage 3 fuel pump, upgraded lines, etc, etc...

D

 

[DELTA_Rotary]

Originally posted by Ricerdude
i I am planning on running the RS43 or RS49, with an external HKS wastegate, 770 injectors, stage 3 fuel pump, upgraded lines, etc, etc...

D

arent we all?

 

[autronicDSM]

i plan on running this...

You must be logged in to view this image or video.

 

[Ben K]

Originally posted by autronicDSM
i plan on running this...

You must be logged in to view this image or video.

Nice sig.