The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

what supporting mods do i need for this turbo kit?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

For any 50 trim kit you will need the following 660 injectors, fuel pump, S-AFC, 3" Turbo back, Street FMIC and good tuning. You will also need all the basics. Let me know if there are any other questions. If you have those plus good tuning and race gas, 400whp is will be pretty easy.
 
Race94, though Ryan (as always) was kind enough to help, a little research on your part would benefit your quest for speed.
 
Spark pugs if you consder them inernal, Forged pistons, camshaft, vavlve springs, Butcher crank... If you ask me youd be fine on stock internals. It all depends on if you want to stay street legal/emissions legal and if your afraid of the possibilty of CRANK WALK whih is common in 2g dsms return of the dsm owners worst night mare dun dun dun. There have been some guys who mod their engien completely and it runs just fine and theres the unlucky few who experience this problem.
I could be wrong though.

I would swap yr second gen 4g63 7 bolt for a 1st gen 4g63 6 bolt before buying a turbo. sell your 2nd gen on eay to pay for it or see if anone wants it.

Dont let crank walks deter you from modding your car though. its totally random and theres no way of telling if it will happen to you.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top