Question about setting up FPR

[SpoolinGSX]

I have an Aeromotive Fuel Pressure Regulator with -6 AN fittings. I wanted to buy an AEM Fuel Rail because it has fittings at the end to go out to the FPR.

My question is what fuel line adapters would i need to connect these parts to the stock fuel system? It seems a bit vague but i
just need to know what i need to connect the fuel pressure regulator to the AEM fuel rail, and how to connect it to the stock return line. Also I was wondering if i need any special adapters for the fuel rail to fit onto the fuel line. Thanks if can help me out or point me in the direction of someplace that could.

 

[KRAZYKOREAN]

You don';t need a aem fuel rail..the stock rail is very sufficient that would be wasting money IMO...you can get a 6an fuel line adapter for the stock rail... check it out on this site and go down a little bit http://www.diamondstarmotorsport.com/fuelparts.shtml there only 25 bucks...

 

[nowayout]

I would just tap the stock fuel rail for AN fitting. I got my hose and fitting for tha total of $31 not including the regulator.

 

[SpoolinGSX]

Thanks for the link. That is much cheaper than the AEM fuel rail. I was only going to get that because i done have the ability to do any welding, but this ones a bolt on it says.

 

[Violater101]

Thats what I used for mine. I think I then spent about another 70 bucks in AN fittings. End result is that it works great