what would be the highest boost on these mods?

[mitsugsx95]

I have a ported sm16g, 190lph walbro, supra SMIC, ic pipes, intake, full 3" exh, ported exhaust manny, and others in my profile. I am going to the track soon and I want to get the most out of the turbo as i can with the current fuel mods. I am running 12psi right now. It is fast, but I know it would be alot faster at about 14-15psi. What should I try and run it at?

 

[mitsugsx95]

Anyone have any input on thier setup????? Come on.

 

[Slow99x]

Depends on what octane fuel you're running. I've got a ported 14b and I was running 22 psi on 110 octane fuel the other night when I smoked a first gen. 18 psi is about as high as you should go on 93 octane.

 

[TurBoGs-T]

If you are asking because you want to dial it up to 14-15 then go ahead you have more than enough support to run 14-15. As a matter of fact 14-15 probably wouldn't even be close to your danger zone. But hell yea turn up the boost baby!!!!

 

[mitsugsx95]

Thanks. I just wanted to know what I should push it up to at the track. I am getting my profec-b in a couple days, so I want 15psi to be my high boost for now untill I get new injectors.

 

[Blitzed95Eclips]

talk about playing it safe man. I dont know if your just scared or what but i was hitting 16 psi with a t25 without a boost controller and everything was fine. I didnt even have a upgraded fuel pump like you do. I ran 20 psi on 114 octane fuel on my 14b without a fuel pump. You could run 20psi on race gase on your 16g easily.

 

[mitsugsx95]

I just didnt know what I should be running witht the stock injectors still.
Im only going to be running 93 octane at the track. I want to see how fast I can get it on pump gas.