Coupler 1g

[EVTBernie]

Im hooking up my dejon intake but I'm missing the rubber coupler that goes from the intake to the maf and clamps. Does anyone know where I can get one? Or get one from HD or lowes?

 

[92AWDHX40]

Any pics. Did you look at any vendors for it, lots on some sites for parts, did you try dejon too, or stm, sim or any vendors.

 

[EVTBernie]

You must be logged in to view this image or video.

I have the coupler from the turbo so I need the one to the left the oval one

 

[hhuricane]

It's nothing special. Just water hose. Go to any auto parts or truck shop and they should have what you need.

 

[T is for TURBO]

It's nothing special. Just water hose. Go to any auto parts or truck shop and they should have what you need.

That would have to be a hell of a large water hose.

OP, go here for what you need. Great prices and pretty good quality.
Intercooler Pipe Fabrication - Silicone Intake Systems Auto Parts

 

[Ravenous]

You could probably track something down at Home Depot. Run a string around the outside of the pipe opening and tie it off. Take it in and find the right size hose coupler. Nothing special is needed as it won't see any positive pressure. That coupler in the picture was round at one point so you just have to find the right size round coupler and the clamps will deform to shape.

 

[agentorange313]

It its a 2g intake, designed for a 2g MAS, then it is a 4 inch coupler. If it is a 1g/3g MAS style its a 3.125" coupler, 3 and 1/8.

All of our supporting vendors sell couplers.

 

[91stocker]

I could of swore it was 4.5". But yea it appears to be a 4".

That link has them for $9.99
http://www.siliconeintakes.com/prod...d=437&osCsid=d951ec8f3307665dd50c979f72569449

Add 2 - 4" clamps as well.

 

[EVTBernie]

Yeah it's a 2g mas I read the guy on VFAQ got his from some hardware store but wasn't sure.