Frank 2 Install Need Help

[BILLY BREESE]

DECIDED TO KEEP MY FRANK 2 AND INSTALL IT. ALMOST DONE BUT FORGOT WHICH WATER LINES GO WHERE. LOOKING AT THE FRONT OF THE HEAD YOU HAVE THE MAIN WATER LINE ABOUT 2" DIA. AND YOU HAVE A REALLY SMALL WATER LINE THAT RUNS UNDER IT. IT POINTS DOWN TO THE GROUND. I NEED TO KNOW IF THIS LINE GOES TO THE FRONT WATER INTAKE ( TWARDS THE RADIATOR) OR THE BACK ONE (SITTING TWARDS THE HEAD). THE OTHER WATER LINE COMES OUT OF THE WATER FILLER NECK KIND OF POINTS TWARDS THE TURBO. IF ANY REMEMBERS CAN YOU GIVE ME A SHOUT. THANX BILLY [email protected]

 

[candela]

Well considering you didnt give car info, install kit info and you typed in CAPS... Ill be nice anyway and help you out =)

The bif water line that comes off of the water pump has a U shaped line coming out from underneath it more towards the left (if your looking at it from the front), this water line wraps around the turbo and utilizes a banjo bolt and screws into the front hole on the cartrige. The top hole is the oil feed line from the head or from wherever you have an SS tapped from. The bottom is obviously the oil return. Finally the rear hole is the other coolant connection. This peice also has a banjpo fitting screwed in, the pipe goes behind the turbo towards the tranny side and bends up, it connects to a rubber connect right underneath the thermostat housing...hope this helps

austin