O2 eliminator downpipes on T3/T4

[ZSPTurbo]

I plan on running a t3/t4, but before I do I plan on getting the "extreme turbo and dsm performance" O2 eliminator downpipe... would I be able to use this downpipe and O2 elim downpipe with my new turbo? Is there any way I would be able to?

 

[larryd]

no, they do not bolt up.. with a T3/T4 you need a different o2 housing/downpipe.

 

[ZSPTurbo]

Originally posted by larryd
no, they do not bolt up.. with a T3/T4 you need a different o2 housing/downpipe.

ok.... can I get a downpipe before the turbo, and use that with the turbo too? just use a diffrent O2 housing?

 

[larryd]

depends on the o2 housing that you go with.. Im not sure.. your best bet is to call around the places that make o2 housings for the t3/t4 and find out what downpipes will fit them and if the downpipe will also fit the stock o2 housing.

 

[Unreal]

The agp t3/t4 o2 housing will bolt up to any stock style downpipe. So if it fits stock o2 housing, it will fit. I'm using a RRE downpipe on my kit.

 

[DSMotorsport]

ditto on the T3T4 o2 housing I retail...2.5" is the size of the pipe.
It will bolt up to any standard DSM downpipe (same flange dimensions as stock O2 housing).
fits standard garret 5 bolt turbine housing.

 

[ZSPTurbo]

if I have the 2.5 inch O2 pipe can I still run a 3 inch downpipe? hows that work?

 

[Unreal]

Just converts from 2.5" to 3". I have an RRE downpipe that goes to 3" after the flex section. So its 2.5" to the flex, then 3" back. Simple as that.

 

[Z1500]

You need to know if your turbo has a 4 or 5 bolt outlet. The AGP one is for 4-bolt and the one DSMotorsport sells is 5-bolt. The AGP one has slotted bolt holes for the down pipe so you can run a full 3" pipe right to the flange.

Kevin
www.agpturbo.com

 

[99 gst 420a dsm]

i need an 02 elbow for a 16g, if anyone has one for cheap it would help alot!!