need recirculation kit for knock off Greddy RS

[THE REAL DEAL]

Ok so I got my car and it's been running vented but I have a problem with my idle dropping pretty low at times when I'm idling. It even dies sometimes. I searched on here and saw that some guy got an electrical conduit piece from Lowes and it fit his RS BOV so I went out and got the same one (which was 1") and it was too big. So, I'm pretty sure this thing came off ebay so I don't know if i can try to find the seller it came from and see if they have a recirculation peice I can buy or what. I plan on getting a MAF-T sometime but I don't know when I'll have the funds to throw down on one. What should I do?

 

[The_EE]

I would be more worried about the knock off BoV than a reserc kit. Spend the money and buy a Type S used if you can and use your stock tube and go that route.

knock off items are a no no. Good way to break your stuff when using inferior parts.

Plus, knock off items are like stealing from the companies that it was copied from. Good way to support the company that took the time to design and test the item to make sure it works but to save a few bucks, you bought a knock off made from cheaper parts with no R&D.

 

[kmoore]

My advice would be to throw that RS in the trash (real or knock-off). But to answer your question the recirculation piece for the REAL greddy type RS will fit the knock-off. Here is a link for you:
http://www.extremepsi.com/store/customer/product.php?productid=17766&cat=357&page=1

:Edit: and yes you should recirculate properly until you get that MAFT setup

 

[THE REAL DEAL]

I would be more worried about the knock off BoV than a reserc kit. Spend the money and buy a Type S used if you can and use your stock tube and go that route.

knock off items are a no no. Good way to break your stuff when using inferior parts.

Plus, knock off items are like stealing from the companies that it was copied from. Good way to support the company that took the time to design and test the item to make sure it works but to save a few bucks, you bought a knock off made from cheaper parts with no R&D.

I didn't buy a damn thing, smart guy. It was on there when I got the car. I'm just trying to fix everything.

 

[kmoore]

Just recirculate properly

 

[THE REAL DEAL]

Just recirculate properly

.........that's what i'm trying to do. you think i like it when my car dies when come to a stoplight? i'm not venting on my own will here. i'm trying to fix it.

 

[chicagoavenger]

My advice would be to throw that RS in the trash (real or knock-off). But to answer your question the recirculation piece for the REAL greddy type RS will fit the knock-off. Here is a link for you:
http://www.extremepsi.com/store/customer/product.php?productid=17766&cat=357&page=1

:Edit: and yes you should recirculate properly until you get that MAFT setup

It won't fit someone on dsmtalk bought my knockoff and bought the rec fitting for it and it will NOT fit.

 

[kmoore]

It won't fit someone on dsmtalk bought my knockoff and bought the rec fitting for it and it will NOT fit.

REALLY?!?! The threads wouldn't match up or is the actual diameter not the right size?

 

[chicagoavenger]

The diameter is not the correct size it need to be a mm smaller.