Bolt-on cat back that comes w/o muffler

[Woodsy0]

I'm looking for a bolt-on cat back exhaust system for my GSX that includes the piping and hangers all prewelded, but allows you to use their own muffler. I have a Magnaflow one that I'm looking to use, and I tried doing the welding of the pipes and hangers myself and more or less fudged up...Any ideas? I tried kteller.com, but they don't make bolt-up exhaust kits for 2nd gens, only 1st gens.

Thanks.

 

[DSM90AWD]

I Know VRS sells the cat-back kits minus the muffler, and would assume they could weld it up for an extra charge. Or just take the whole kit to a local exhaust shop and have them do it (should run $30-50)

 

[Woodsy0]

I actually already have a slip-fit clamp for the pipe-to-muffler which I could reuse in lieu of welding, so I'll probably take that route unless it leaks...

Thanks for the link, I think this is exactly what I'm looking for.

 

[Woodsy0]

DSM90AWD, I meant to ask -

You meant that their cat-back kits come without the pipes and hangers pre-welded? Or they do come prewelded, and it would just be a matter of fitting the muffler?

 

[staticbrainwash]

Kteller.com has catback and turboback systems that come pre-bent and welded with hangers. Comes in various sizes in mild steel and SS.

Here's a link for ya. http://www.kteller.com/store/index.php/cPath/23?osCsid=91ee2b900372399f15aa6d818b4d2624

 

[hereitcomes]

VRS exhaust's come bent with no hangers welded on. You have to weld the sections together, but the kit is made for your car. You can also select a muffler. Just make sure that when you get a muffler it has a same inlet for the diameter of piping for your exhaust. Good luck man.

 

[Woodsy0]

Thanks for the help. It took me two broken hangers and a hole in a pipe due to upping the amperage on the welder to realize that I should probably practice a bit more with the arc welder before trying to custom make my own exhaust...I'll be taking it to an exhaust shop once I get the VRS pipes in, I'll let you know how it goes.