Help Me Asap

[96turbogst]

Ok first of all i don't know much about working on the inside of my engine.. i got my head off and im trying to get the cams out . i got the things off that were holding the cams down but i cant get them out do i pull them yank them.. throw my head on the ground till they come out .. someone help me out here im trying to get everything out of it so i can get it ported tomarrow

 

[CraigB]

If you have all of the cam caps off and the CAS out you can pry on the cams (not on the lobes) with a large screw driver. Be gentle the will come right out.

 

[96turbogst]

ok i got the cams out thatnks.. non im on everything else the springs and all.. how do i get thoes out.. i have aol and yahoo can someone get back to me and thanks craig

 

[96turbogst]

sorry about the spelling i havent been to sleep yet

 

[CraigB]

Well if you want to take the valves out. You need a valve spring compressor or if you do not have one you can use a deep socket and a hammer. If you use the socket and hammer make sure to keep track of valve keepers.