SBstar
15+ Year Contributor
- 3,038
- 125
- Jan 1, 2004
-
Jackson,
Michigan
Alright I'm looking at the Aeromotive Fuel pressure regualtor here are the specs.
The Aeromotive A1000-6 Injected Bypass Regulator was developed for high horsepower EFI applications. Compatible with the Aeromotive A1000 Fuel Pump, this regulator is a cousin to our widely-used A1000 Injected Bypass Regulator, delivering performance, long-life, and reliable operation.
Base pressure (vacuum/boost disconnected) is adjustable from 30 to 70 PSI.
Pump Gas, Race Fuel and Alcohol compatible.
Provides two -6 AN inlet ports and one -6 AN return port.
fuel pressure will rise on a 1:1 ratio when referencing boost.
1/8" NPT gauge port.
Beautifully finished with type II bright red and clear anodized coatings.
Any extra fittings are sold separately.
Is this the fittings I need? I have a 255 lph fuel pump and stock fuel rails.
SBR Fuel Filter (1G / 2G) Bottom Fitting
This is the fitting you need to connect your stock fuel filter to a 6AN feed line.
Do I need anything else. I would really appreciate some help with this. I would get the one designed for the 1G but its out of stock so and i need one an FPR to get my car running.
The Aeromotive A1000-6 Injected Bypass Regulator was developed for high horsepower EFI applications. Compatible with the Aeromotive A1000 Fuel Pump, this regulator is a cousin to our widely-used A1000 Injected Bypass Regulator, delivering performance, long-life, and reliable operation.
Base pressure (vacuum/boost disconnected) is adjustable from 30 to 70 PSI.
Pump Gas, Race Fuel and Alcohol compatible.
Provides two -6 AN inlet ports and one -6 AN return port.
fuel pressure will rise on a 1:1 ratio when referencing boost.
1/8" NPT gauge port.
Beautifully finished with type II bright red and clear anodized coatings.
Any extra fittings are sold separately.
Is this the fittings I need? I have a 255 lph fuel pump and stock fuel rails.
SBR Fuel Filter (1G / 2G) Bottom Fitting
This is the fitting you need to connect your stock fuel filter to a 6AN feed line.
Do I need anything else. I would really appreciate some help with this. I would get the one designed for the 1G but its out of stock so and i need one an FPR to get my car running.
