question about 2G turbo oil feed line kit.

[99gst_racer]

I will be installing a 14b on my 2G in a month and I want to replace the oil feed line. I dont want to spend $55 plus $13 for shipping, so I'm going to make my own. I have a picture below of a kit. Does anyone know what AN size hose to use? Can I use regular stainless braided race hose, or does it have to be high-pressure or teflon? Also, what is the pipe thread on the 90 degree fitting? Do the fitting on the line have to be crimped on, or can I use regular re-usable aluminum fittings? Please let me know. I have all these parts readily available to me, I just dont know which ones to use..... Thanks.

 

[fertez_turbo]

I will be installing a 14b on my 2G in a month and I want to replace the oil feed line. I dont want to spend $55 plus $13 for shipping, so I'm going to make my own. I have a picture below of a kit. Does anyone know what AN size hose to use? Can I use regular stainless braided race hose, or does it have to be high-pressure or teflon? Also, what is the pipe thread on the 90 degree fitting? Do the fitting on the line have to be crimped on, or can I use regular re-usable aluminum fittings? Please let me know. I have all these parts readily available to me, I just dont know which ones to use..... Thanks.

I am at my friends house here is the pic I meant to post....thanks!

 

[IPT]

just get a stock oil feed line from a 1G it should work just fine. and plug the stock hole on the 2G.

 

[99gst_racer]

just get a stock oil feed line from a 1G it should work just fine. and plug the stock hole on the 2G.

1. I dont want to run it from the head, because I dont want to lower the pressure in the head.

2. I dont want to reuse 14 year old parts. Thats like reusing oil or an oil filter.

3. I allready answered my own question, but thanks anyways.