DSMTrend.com $55 for 8.5mm wires and NGK Plugs?

[98TsiAWD]

http://www.dsmtrend.com/xcart/customer/product.php?productid=16234&cat=317&page=1

Do these fit the turbo? That is cheap and it includes the plugs too.

Or should I get 10.4mm for $89 http://www.dsmtrend.com/xcart/customer/product.php?productid=16235&cat=317&page=1

Here is the mods I plan on doing:

Plugs and wires
walbro 190lph
all IC piping replaced
Clutch
3" Turboback exhaust
safc
fpBig28
sidemount upgrade ic

and of course some other minor stuff, but which wires would be better for me?

 

[L2RTSiAWD]

Wow!! That's a great deal

 

[98TsiAWD]

Originally posted by L2RTSiAWD
Wow!! That's a great deal

I KNOW!!!! So the MSD Wires are good and I should get them? 8.5 or 10.4? I think I will order them as soon as I can because that price could go up.

 

[Turbo Guru]

Originally posted by L2RTSiAWD
Wow!! That's a great deal

I agree! But to answer your question get the 8.5s they are all you need.

Joe

 

[larryd]

yeah 8.5 should be plenty enuf and that is a hell of a deal

 

[laserspeeddemon]

I agree too! If you start to get upwards of 600whp then you might want to get the 10mm or high plug wires

 

[DSMu4ia]

Originally posted by laserspeeddemon
I agree too! If you start to get upwards of 600whp then you might want to get the 10mm or high plug wires

You meant to say "some other ignition"

 

[cucumber]

That is a helluva a deal. I think I'll scoop some up.

 

[GRNDSM]

Keep one thing in mind. Getting right DSM plug wires is pretty tricky. Because our ignition coils are extremely strong, they are very good at finding even the smallest flaws in plug wires. Case and point, Accell 8.8 (or what ever their size is) plug wires, which do not work very in DSMs. So before I get MSD wires, I would check to see what luck others are having with them.

As for needing 10mm wires on 600hp cars… The only cars that need 10mm wires are show cars. Or at least, that is the case with the Magnacores. It is possible that other brands have inferior 8-8.8mm wires and need 10mm for higher HP and if that is the case, then why not just get the Magnacores?

Plug wires is not a place where you should look for saving money. That $20 of savings will be eaten up at your first wasted trip to the track…

Until I hear some independent feedback from fast people (not a bunch of 13-14sec cars), I would only recommend using NGK or Magnacore plug wires.

Leon
RR

 

[AWDkitkat]

i had a problem twice with MSD's leaking.
I just stick with good ol NGK wires from the dealer, 40 bucks.
I also have friends with 400 hp dsm's running full stock fire so i nont see the need.

 

[laserspeeddemon]

There are 2 reasons I upgraded the wires:
1- needed tune-up, may as well upgrade
2- Recommended by the guy with the fastest DSM