boost Creep= Kaboom?

[TalonRacer024]

Will be installing a 3" apexi N-1 Turbo back this tuesday. All i have other than that is a K@N. Will boost creep be bad enough to cause serious problems. I don't have the money to go ahead and do all the porting i want to. Any help would be great.

 

[GSX4LIFE]

You should have no problem.

 

[larryd]

no, it wont be that bad to cause problems

 

[McGruff]

let me get something straight real quick. If i get the RnR O2 Elim turbo back exhuast and a stock t25 there should be no boost creep at all right? Because i have a well flowing exhuast right?

 

[Violater101]

I would say you should be fine, if you had a bigger turbo and the wg hole off the turbo wasn't big enough, then you might have some problems. I think that's my problem right now. I used to not have any problems till I put on a Green and now I can't boost at all because of the creep is so bad. It should be holding 11 psi and i'm hitting way over 19 lbs Your still primarily stock with t25 and even if you did boost to 18lbs or so, its mainly just hot air anyhow.

 

[Black95GSX]

... a T25 could not creep enough to cause problems.


As far as the 3" exhaust creeping problem -- You shouldn't have any problems, but it would still be a good idea to re-wire your fuel pump.

 

[TalonRacer024]

i am running a 14b. i am a 1st gen guy