16g mods

[cprracing]

I have a question on the 16g turbo what is the diffrence between a big 16g and a little 16g turbo the best price that i have found is $420 is that a good deal or can you get better??? When i get this will my car run ok or will have to make more mods for the turbo?? Will it bolt right up.

 

[Turbo Guru]

Difference = about 30 cfm

(This compiled chart seems to be fairly accurate (flow-wise) from the numbers I have seen elsewhere. However, I do not think the "WHP" and "Eff. boost levels" numbers are accurate.) http://www.dsmtuners.com/forums/showthread.php?s=&threadid=2566&highlight=16G*+and+flow

Joe

 

[got traction?]

The 16g wont just bolt right up you will need the hacker/tweaker install kit from RRE. Or you can get a 1g lower pipe and ghetto rig the #@$@. Also going to need a Oil return line. Now you dont need to get the install kit if you go with a b16g that has a rotated compressor housing on it. For mods, you are going to need atleast a fuel pump and injectors. You dont need the fuel computer right away, but it will be help full to keep your car from runing pig rich. A 3'inch dp would also be needed.

 

[Blixx]

Originally posted by got traction?
The 16g wont just bolt right up you will need the hacker/tweaker install kit from RRE. Or you can get a 1g lower pipe and ghetto rig the #@$@. Also going to need a Oil return line.

Hmmm, maybe for a 2g...

The 16g will bolt right up, and if you keep the boost down no fuel mods are required (though i wouldnt do it without at least re-wiring). Also, where'd you find the 16g for 420? most places are around 600...

Blake

 

[candela]

second that

 

[cprracing]

i found one at turbotrix.com for 420 also how do you rewire the fuel pump?

 

[cprracing]

i Forgot to add that its the cartlidge only !! I can just use the one off my stock turbo cant I!

 

[Blixx]

www.vfaq.com for fuel pump re-wire.

Not sure on just buying the cartridge.

Blake