The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Aftermarket filter and gasket?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

burkgonzo

15+ Year Contributor
1,007
16
Oct 27, 2005
Wichita Falls, Texas
Anyone had issues with an aftermarket filter and gasket in these cars? I picked up on from a parts store and just making sure they are legit. If not let me know! Thanks!
 
Anyone had issues with an aftermarket filter and gasket in these cars? I picked up on from a parts store and just making sure they are legit. If not let me know! Thanks!

Im running a napa brand trans filter that has a yellow paper element. Granted, Iv only made 5 passes on my auto-swap, but the trans doesn't appear to be slipping or showing any line pressure symptoms from the filter being restrictive. It's held solid on a mid 10 & 130+ mph 16g setup that I would guestimate is near 500hp.
 
The last dealer one I bought was $53.00 last year...MD735572..
Knowing this filter has been in the sevens, is enough to keep me buying them for my slow ride...;) Cheap insurance I think..
 
Last edited:
I'm a Wix kind of guy myself. Most of Napa's part numbers match up to the Wix part numberse and in fact are Wix filters.
 
For the first time in a long time I found an OEM style filter at a parts place. I just needed a gasket so I went to Advance auto and found the filter that came in the ~$12 kit was OEM style and just kind of jumped for joy
 
The last dealer one I bought was $53.00 last year...MD735572..
Knowing this filter has been in the sevens, in enough to keep me buying them for my slow ride...;) Cheap insurance I think..

Yea I picked one up from a parts store but I don't want 40 dollars to cause a tranny rebuild LOL.
 
The wix filters are just as good as OEM, maybe even better.

OEM is often overated, as long as you buy a quality part. Stay away from ricerzone brand items for the most part.

I run Oreilly's Brand Oil in my saturn, and never had an issue. Recently changed to Castrol GTX syntehic, and hell I can tell any differnce, going back to the cheaper oreily's brand oil next time.

I would just make sure to change the filter every 12,000 miles, along with good quality trans fluid. Go with wix/napa/oreilly's brand filter.
 
What about IPT? I havent seen any issues with my tranny, but I havent taken it down the track yet either...
 
What about IPT? I havent seen any issues with my tranny, but I havent taken it down the track yet either...

That would be interesting if IPT didn't use OEM filters....If they OKed an aftermarket filter, I might feel differently..
The person that built my trans insist on them and Kiggly does too..
 
I bought mine from the dealer it was 43$. I then got curious and went into napa to see if they could get me a similar one. They did and it cost half of what the oem one did. I have a comparison picture in my photobucket account. I have the napa one still on packaging if you want the part number.

They are exactly the same as oem. Don't get it from Autozone or checkers though. They are too small and don't fit properly. I did however use the gasket from checkers and havent had any issues.

As far as fluid I used valvoline ATF +4 full synthetic. Walmart has it for 5 a quart which isn't bad.

Hope his helps.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
Back
Top