auto 1/4mile times

[talontuner1997]

Hey just looking for an estimate here on what my car will run at that track. i ran last year 14.4 98mph. 2.2 60ft street tires....time was ran with evo3 ported, o2 housing ported, mani ported, 1g blow off valve, hahn race craft smic and all hard piping, k and n, 3inch turbo back, stock auto tranny and engine internals... small break torque around 3000rpm 14psi of boost.

when i go back all be running fully rebuilt tranny. ipt parts... performance rebuild kit, manual valve, shift kit, lsd, bigger cooler, rebuilt pump high stall torque converter stall will be around 3800.. next fully rebuilt 7bolt long block stage 3 buschar racing head.... other mods that will be included 850cc injectors walbro 190 rewired, meth injection, dsm link.. 22-25psi of boost fully tuned..


any idea what all run with slicks??

[inneedof]

at your power level i really don't see slicks as necessary... but i would expect to be in the 12's, depending on your tune

[420a-t]

Isn't that bench racing? Anyways, you can take a look at my profile, mods are current. The thing I don't get is that I can launch at 3500rpm with 20-21psi and I have a stock tranny and longblock, except for an external tranny cooler. I would get a bigger stall than that.

Btw I don't know why my profile says 9.999 in the 1/4, but it was a 12.319

[talontuner1997]

i will need slicks.... im fwd so i higher stall then 3800 will prob hurt me...

[420a-t]

Sorry, I overlooked that. Are you satying with your 16g or going bigger? You should see a big jump in numbers with those new mods.

[talontuner1997]

for now all be staying with the evo 3 to see what i hit with it. if i upgrade it will be fp30502